LDP Configuration Commands 739
Use the undo peer label-route-capability command to disable a peer group
from handling the label-carried IPv4 routes.
By default, a BGP peer group cannot handle label-carried IPv4 routes.
Example
# Enable IBGP peer group and EBGP peer group to handle the label-carried IPv4
routes.
[3Com-bgp] group ibgp internal
[3Com-bgp] peer ibgp label-route-capability
[3Com-bgp] group ebgp external
[3Com-bgp] peer ebgp label-route-capability
peer next-hop-local Syntax
peer group-name next-hop-local
undo peer group-name next-hop-local
View
VPNv4 sub-address family view, VPN-instance sub-address family view
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
Description
Use the peer next-hop-local command to cancel the processing of the next hop
in the routes that BGP advertises to a peer group and configure to use its own
address as the next-hop.
Use the undo peer next-hop-local command to cancel the existing setting.
Example
# Specify the current BGP address as the next-hop in its route advertising to a peer
group.
[3Com-bgp] ipv4-family vpnv4
[3Com-bgp-af-vpn] peer test next-hop-local
peer password Syntax
peer { group-name | peer-address } password { cipher | simple } password
undo peer { group-name | peer-address } password
View
VPN-instance sub-address family view
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
To Next Page
Loading...
