LDP Configuration Commands 745
undo peer group-name vpn-instance vpn-instance-name enable
View
BGP-VPNv4 sub-address family view
Parameter
group-name: Name of a peer group.
vpn-instance-name: Name of the VPN instance the CE peer belongs to.
enable: Enables VPNv4 function for the CE.
Description
Use the peer vpn-instance enable command to enable the VPNv4 function for
the BGP peer group of a CE.
Use the undo peer vpn-instance enable command to disable the function.
By default, the VPNv4 function is disabled.
Example
# Enable the VPNv4 function for the peer group of a CE.
[3Com-bgp] ipv4-family vpn-instance vrf1
[3Com-bgp-af-vpn-instance] group ebgp external
[3Com-bgp-af-vpn-instance] quit
[3Com-bgp] ipv4-family vpnv4
[3Com-bgp-af-vpn] peer ebgp vpn-instance vrf1 enable
peer vpn-instance group Syntax
peer peer-address vpn-instance vpn-instance-name group group-name
undo peer peer-address vpn-instance vpn-instance-name
View
BGP-VPNv4 sub-address family view
Parameter
peer-address: IP address of a peer, in dotted decimal notation.
vpn-instance-name: Name of the VPN instance the CE peer belongs to.
group-name: Name of a peer group.
Description
Use the peer vpn-instance group command to join a CE neighbor into a BGP
peer group.
Use the undo peer vpn-instance group command to clear the CE neighbor from
the BGP peer group.
By default, a CE neighbor does not belong to any peer group.
To Next Page
Loading...
