3Com 8807 - Screen-Length; Return

Logging in to Switch Commands 57
Example
# Return to user view from system view.
[SW8800] quit
<SW8800>
return Syntax
return
View
System view or above
Parameter
None
Description
Use the return command to return to user view from a view other than user view.
Combination key <Ctrl+Z> performs the same function with the return
command.
Related command: quit.
Example
# Return to user view from system view.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800]vlan 2
[3Com-vlan2] return
<SW8800>
screen-length Syntax
screen-length screen-length
undo screen-length
View
User interface view
Parameter
screen-length: Specifies how many lines can be displayed on a screen, ranging
from 0 to 512. The default value is 24.
Description
Use the screen-length command to configure how many lines that can be
displayed on a screen of the terminal.
Use the undo screen-length command to restore the default number of terminal
information lines displayed on the terminal screen.