3Com 8807 - Display Qos-Interface Mirrored-To; Display Qos-Interface Queue-Scheduler

238 CHAPTER 17: QOS COMMANDS
Parameter
interface-type interface-number: Port of the switch, for detailed description,
please refer to Command Manual - Port.
Description
Use the display qos-interface drop-mode command to view drop mode
configuration of outbound queues at a port. If no port is specified, drop mode
configuration of all ports will be displayed.
Related command: drop-mode.
Example
# Display drop mode and parameters of the port Ethernet2/1/2.
<SW8800> display qos-interface Ethernet2/1/2 drop-mode
Ethernet2/1/2 Drop-mode: tail-drop, params index: 0
display qos-interface
mirrored-to
Syntax
display qos-interface [ interface -type interface-number ] mirrored-to
View
Any view
Parameter
interface-type interface-number: Port of the switch, for detailed description,
please refer to Command Manual - Port.
Description
Use the display qos-interface mirrored-to command to view traffic mirroring
configuration of a port.
Related command: mirrored-to.
Example
# Display traffic mirroring configuration.
<SW8800> display qos-interface mirrored-to
GigabitEthernet2/1/1: mirrored-to
Inbound:
Matches: Acl 2020 rule 0 running
Mirrored to: cpu
display qos-interface
queue-scheduler
Syntax
display qos-interface [ interface -type interface-number ] queue-scheduler
View
Any view
Parameter
interface-type interface-number: Port of the switch, for detailed description,
please refer to Command Manual - Port.