3Com 8807 - Peer Route-Update-Interval; Peer Timer

LDP Configuration Commands 743
The incoming filtering policy configured for peers take precedence over the
configuration for peer groups.
Related command: peer route-policy export.
Example
# Apply the routing policy test-policy to the incoming routes of the peer group
test.
[3Com-bgp] ipv4-family vpnv4
[3Com-bgp-af-vpn] peer test route-policy test-policy import
peer
route-update-interval
Syntax
peer group-name route-update-interval seconds
undo peer group-name route-update-interval
View
VPN-instance sub-address family view
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
seconds: Update interval in seconds, ranging from 0 to 600.
Description
Use the peer route-update-interval command to set the Update interval for
peers.
Use the undo peer route-update-interval command to restore the default
setting.
By default, the Update interval is 5 seconds for IBGP peer group, and for EBGP it is
30 seconds.
Example
# Set the minimum interval for sending routing update packet to the BGP peer
group group1 to be 10 seconds.
[3Com-bgp-af-vpn-instance] peer group1 route-update-interval 10
peer timer Syntax
peer { group-name | peer-address } timer keep-alive keepalive-interval hold
holdtime-interval
undo peer { group-name | peer-address } timer
View
VPN-instance sub-address family view