3Com 8807 - Peer Ip-Prefix Import

532 CHAPTER 27: BGP CONFIGURATION COMMANDS
View
BGP view
Parameter
group-name: Name of peer group.
prefixname: Name of the specified ip-prefix. It is a character string of 1 to 19
characters.
export: Applies the filtering policy on the route transmitted to the specified
peer/peer group.
Description
Use the peer ip-prefix export command to configure the route filtering policy of
routes advertised by the peer group based on the ip-prefix.
Use the undo peer ip-prefix export command to cancel the route filtering policy
of the peer/peer group based on the ip-prefix.
By default, the route filtering policy of the peer group is not specified.
The peer ip-prefix export command can only be configured on peer groups.
Related command: peer ip-prefix import.
Example
# Configure the route filtering policy of the peer group based on the ip-prefix 1.
[3Com-bgp] peer group1 ip-prefix list1 export
peer ip-prefix import Syntax
peer group-name ip-prefix prefixname import
undo peer group-name ip-prefix prefixname import
View
BGP view
Parameter
group-name: Name of peer group.
prefixname: Name of the specified ip-prefix.
import: Applies the filtering policy on the route received by the specified
peer/peer group.
Description
Use the peer ip-prefix import command to configure the route filtering policy of
routes received by the peer/peer group based on the ip-prefix.
Use the undo peer ip-prefix import command to cancel the route filtering policy
of the peer/peer group based on the ip-prefix.