622 CHAPTER 36: PIM CONFIGURATION COMMANDS
timer: Debugging information of PIM-DM timer.
warning: Debugging information of PIM-DM warning message.
recv: Debugging information of PIM-DM receiving packets.
send: Debugging information of PIM-DM sending packets.
assert | graft | graft-ack | join | prune: Packets type.
Description
Use the debugging pim dm command to enable PIM-DM debugging functions.
Use the undo debugging pim dm command to disable the debugging functions.
By default, PIM-DM debugging functions are disabled.
Example
# Enable all PIM-DM debugging functions
<SW8800> debugging pim dm all
debugging pim sm Syntax
debugging pim sm { all | mbr { alert | fresh } | verbose | mrt | msdp | timer {
assert | bsr | crpadv | jp | jpdelay | mrt | probe | spt } | warning | { recv | send }
{ assert | bootstrap | crpadv | jp | reg | regstop } }
undo debugging pim sm { all | mbr { alert | fresh } | verbose | mrt | msdp |
timer { assert | bsr | crpadv | jp | jpdelay | mrt | probe | spt } | warning | { recv
| send } { assert | bootstrap | crpadv | jp | reg | regstop } }
View
User view
Parameter
all: All debugging information of PIM-SM.
mbr: Debugging information of PIM-SM multicast border router event. Alert
stands for debugging alert information of PIM-SM multicast border router fresh
stands for debugging renew information of PIM-SM multicast.
verbose: Debugging detail information of PIM-SM.
mrt: Debugging information of PIM-SM multicast routing table.
msdp: Debugging information of correspondence between PIM SM and MSDP.
timer: Debugging information of PIM-SM timer.
assert | bsr | crpadv | jp | jpdelay | mrt | probe | spt: PIM-SM timer type.
warning: Debugging information of PIM-SM warning message.
recv: Debugging information of PIM-SM receiving packets.
To Next Page
Loading...
