3Com 8807 - Display Fib Acl

IP Performance Configuration Commands 107
# Display the FIB entries whose destination addresses are in the range of
169.254.0.0/16 to 169.254.0.6/16.
<SW8800> display fib 169.254.0.0 255.255.0.0 169.254.0.6 255.255.0.0
Route Entry Count: 1
Destination/Mask Nexthop Flag TimeStamp Interface
169.254.0.1/16 2.1.1.1 U t[0] Vlan-interface1
For the descriptions of the displayed fields, refer to Table 12.
display fib acl Syntax
display fib acl { number | name }
View
Any view
Parameter
number: ACL in number form, in the range 2000 to 2999
name: ACL in name form, a string of 1 to 32 characters.
Description
Use the display fib command to view the FIB entries matching a specific ACL.
Example
# Display the FIB entries matching ACL 2000.
<SW8800> display fib acl 2000
Route entry matched by access-list 2000:
Summary counts: 1
Destination/Mask Nexthop Flag TimeStamp Interface
127.0.0.0/8 127.0.0.1 U t[0] InLoopBack0
For the descriptions of the displayed fields, refer to Table 12.
display fib | Syntax
display fib | { { begin | include | exclude } text }
View
Any view
Parameter
begin: Displays the FIB entries from the first one containing the character string
text.
include: Displays only those FIB entries containing the character string text.
exclude: Displays only those FIB entries excluding the character string text.
text: Character string.