694 CHAPTER 39: MPLS BASIC CONFIGURATION COMMANDS
7 PREFIX 16.16.16.0/24 3 ---- 0 1 16.16.16.16 Vlan16
8 PREFIX 16.16.16.0/24 3 ---- 0 1 16.16.16.16 Vlan16
9 PREFIX 22.22.22.0/24 3 ---- 0 1 22.22.22.2 Vlan22
Liberal 1.1.0.5/32 ---- 1024 --- 2 -------- ------
10 PREFIX 1.1.0.5 1024 3 0 1 23.23.23.3 Vlan23
11 PREFIX 1.1.0.5 ---- 3 1 1 23.23.23.3 Vlan23
Liberal 85.12.0.1/32 ---- 1025 --- 2 -------- ------
12 PREFIX 85.12.0.1 1025 3 0 1 23.23.23.3 Vlan23
13 PREFIX 85.12.0.1 ---- 3 1 1 23.23.23.3 Vlan23
display mpls ldp peer Syntax
display mpls ldp peer [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular
expression.
include: Displays only those outputs matching the regular expression.
text: Contents of the regular expression.
Description
Use the display mpls ldp peer command to view peer information.
By default, it displays all the peer information.
Example
# Display peer information.
<SW8800> display mpls ldp peer
Displaying information about all peers:
Local LDP ID: 2.2.2.2:0
Peer LDP ID: 1.1.1.1:0
Internetwork Address Type: IPv4
Internetwork Address: 1.1.1.1
Maximum Peer PDU length: 4096
Peer KeepAlive hold time: 60
Peer Distribution Method: Downstream Unsolicited
Peer Type: Remote
Peer RowStatus: Active
Local LDP ID: 2.2.2.2:0
Peer LDP ID: 3.3.3.3:0
Internetwork Address Type: IPv4
Internetwork Address: 3.3.3.3
Maximum Peer PDU length: 4096
Peer KeepAlive hold time: 60
Peer Distribution Method: Downstream Unsolicited
To Next Page
Loading...
