3Com 8807 - Dhcp Enable; Dhcp Select

47
DHCP CONFIGURATION COMMANDS
General DHCP
Configuration
Commands
dhcp enable Syntax
dhcp enable
undo dhcp enable
View
System view
Parameter
None
Description
Use the dhcp enable command to enable DHCP service.
Use the undo dhcp enable command to disable the DHCP service.
For both DHCP server and DHCP relay, you must enable DHCP service first before
performing other DHCP configurations. The other related DHCP configurations
take effect only after DHCP service is enabled.
Example
# Enable DHCP service.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] dhcp enable
dhcp select Syntax
In VLAN interface view:
dhcp select { global | interface | relay }
undo dhcp select
In system view:
dhcp select { global | interface | relay } { interface vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }