3Com 8807 - Display Arp Proxy; Display Arp Timer Aging

ARP Configuration Commands 815
VLAN ID :20
ARP Port-List :
Ethernet6/1/2 Ethernet6/1/3
Ethernet6/1/4 *Ethernet6/1/5
Ethernet6/1/6 Ethernet6/1/7
Ethernet6/1/8 Ethernet6/1/9
Ethernet6/1/1
VPN-Name :Public-ARP
When a "*" precedes a port, the port is in the Up state; otherwise, the port is in
the Down state.
display arp proxy Syntax
display arp proxy [ vlan vlan-id ]
View
Any view
Parameter
vlan-id: Specifies the VLAN ID.
Description
Use the display arp proxy command to display the state of the ARP proxy of a
specified VLAN. An ARP proxy can be in enabled or disabled state.
Related command: arp proxy enable.
Example
# Display the state of the ARP proxy of VLAN 3.
<SW8800> display arp proxy vlan 3
vlan 3
Proxy ARP status: disabled
display arp timer aging Syntax
display arp timer aging
View
Any view
Parameter
None
Description
Use the display arp timer aging command to view the current setting of the
dynamic ARP aging timer.
Related command: arp timer aging.
Example
# Display the current setting of the ARP aging timer.