3Com 8807 - Debugging Mpls Ldp; Display Mpls Ldp

690 CHAPTER 39: MPLS BASIC CONFIGURATION COMMANDS
LDP Configuration
Commands
debugging mpls ldp Syntax
debugging mpls ldp { all | main | advertisement | session | pdu | notification
| remote | filter } [ interface interface-type interface-number ]
undo debugging mpls ldp { all | main | advertisement | session | pdu |
notification | remote | filter } [ interface interface-type interface-number ]
View
User view
Parameter
all: Displays all debugging information related to LDP.
main: Displays the debugging information of LDP main tasks.
advertisement: Displays the debugging information during LDP advertising.
session: Displays debugging information during LDP session processing.
pdu: Displays the debugging information during PDU packet processing.
notification: Displays the debugging information during notification.
remote: Displays debugging information of all Remote Peers.
filter: Displays debugging information of all filters.
interface-type interface-number: Interface type, interface number.
Description
Use the debugging ldp command to enable the debugging of various LDP
messages. Use the undo debugging ldp command to disable the debugging of
various LDP messages.
You are advised to use the debugging command cautiously.
Example
# Enable LDP debugging.
<SW8800> debugging mpls ldp all
display mpls ldp Syntax
display mpls ldp
View
Any view
Parameter
None