116 CHAPTER 8: IP PERFORMANCE CONFIGURATION COMMANDS
reset ip statistics Syntax
reset ip statistics
View
User view
Parameter
None
Description
Use the reset ip statistics command to clear the IP statistics information.
Related command: display ip interface, display ip statistics.
Example
# Clear the IP statistics information.
<SW8800> reset ip statistics
reset tcp statistics Syntax
reset tcp statistics
View
User view
Parameter
None
Description
Use the reset tcp statistics command to clear the TCP statistics information.
Related command: display tcp statistics.
checksum error: 0 Number of checksum errors: 0
shorter than header: 0, data
length larger than packet: 0
Cases that the length of the packets is shorter than the
header: 0
Cases that the data length exceeds the packet length: 0
no socket on port: 0 Cases that there is no socket on port: 0
broadcast: 0 Number of broadcast packets: 0
not delivered, input socket full:
0
Cases that the packets are not forwarded because the socket
buffer is full: 0
input packets missing pcb
cache: 0
Cases that the packets cannot find pcb: 0
Sent packet:
Total: 0
Total sent UDP packets: 0
Table 17 Description on the fields of the display udp statistics command
Field Description
To Next Page
Loading...
