3Com 8807 - Reset Password-Control History-Record

Password Control Configuration Commands 1095
Parameter
aging-time: Specifies the aging time for super passwords. The value range is 1 to
365 days and the default value is 90 days.
min-length: Specifies the minimum length for super passwords. It ranges from 4 to
16 characters, and the default value is 10 characters.
Description
Use the password-control super command to configure some password control
parameters for super commands, including the password aging time and the
minimum password length. Use the undo password-control super command to
restore the default settings.
Example
# Set the password aging time for super commands to 10 days.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] password-control super aging 10
reset password-control
history-record
Syntax
reset password-control history-record [ username username ]
View
User view
Parameter
Username: Specifies a user whose history password record will be deleted.
Description
Use the reset password-control history-record command to delete the history
password records of all users. Use the reset password-control history-record
username username command to delete the history password record of a
specified user.
After the history password record of a user is deleted, the configuration of a new
password will not be restricted by the previously configured history password
records.
Example
# Delete the history password records of all users.
<SW8800> reset password-control history-record
Are you sure to delete all the history record?[Y/N]
If you type "Y", the system will delete the history password records of all users
and gives the following prompt:
Updating the password file, please wait...
All historical passwords have been cleared.
# Delete the history password records of user named test.