3Com 8807 - Display Bgp Multicast Routing-Table Different-Origin-As; Display Bgp Multicast Routing-Table Peer; Display Bgp Multicast Routing-Table Regular-Expression

662 CHAPTER 38: MBGP MULTICAST EXTENSION CONFIGURATION COMMANDS
display bgp multicast
routing-table
different-origin-as
Syntax
display bgp multicast routing-table different-origin-as
View
Any view
Parameter
None
Description
Use the display bgp multicast routing-table different-origin-as command to
view AS routes of different origins.
Example
# Display AS routes of different origins.
<SW8800> display bgp multicast routing-table different-origin-as
display bgp multicast
routing-table peer
Syntax
display bgp multicast routing-table peer peer-address { received | advertised
} [ network-address [ mask ] | statistic ]
View
Any view
Parameter
peer-address: Peer address, in dotted decimal format.
received: Routing information received from a specified peer.
advertised: Routing information advertised from a specified peer.
network-address: IP address of the destination network.
mask: Mask of the destination network.
statistic: Statistic information of the route.
Description
Use the display bgp multicast routing-table peer command to view the routes
received/advertised at/to the specified peer.
Example
# Display routing information advertised to the peer 10.10.1.11.
<SW8800> display bgp multicast routing-table peer 10.10.1.11 advertised
display bgp multicast
routing-table
regular-expression
Syntax
display bgp multicast routing-table regular-expression as-regular-expression