3Com 8807 - Display Vrrp; Debugging Vrrp

43
VRRP CONFIGURATION COMMANDS
VRRP Configuration
Commands
debugging vrrp Syntax
debugging vrrp { state | packet | error }
undo debugging vrrp { state | packet | error }
View
User view
Parameter
state: Debugs VRRP state.
packet: Debugs VRRP packets.
error: Debugs VRRP errors.
Description
Use the debugging vrrp command to enable the VRRP debugging.
Use the undo debugging vrrp command to disable the VRRP debugging.
By default, the VRRP debugging is disabled.
Example
# Enable VRRP state debugging.
<SW8800> debugging vrrp state
display vrrp Syntax
display vrrp [ interface vlan-interface interface-number [ virtual-router-ID ] ]
View
Any view
Parameter
interface: Displays the VRRP state of a specified VLAN interface.
vlan-interface interface-number: VLAN interface name.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.