3Com 8807 - Packet-Filter

ACL Commands 223
Related command: display flow-template, flow-template user-defined.
Example
# Define a flow template which classifies traffic by source and destination IP
addresses, source and destination TCP/UDP ports, DSCP domain in the IP packet
header.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] flow-template user-defined slot 3 sip 0.0.0.0 dip 0.0.0.0
sport dport dscp
packet-filter Syntax
Command Format Which Only Applies IP Group ACL
packet-filter inbound ip-group { acl-number | acl-name } [ rule rule [
system-index index ] ]
undo packet-filter inbound ip-group { acl-number | acl-name } [ rule rule ]
In VLAN view:
packet-filter inbound ip-group { acl-number | acl-name } [ rule rule ] [
system-index index ] slot slotid
undo packet-filter inbound ip-group { acl-number | acl-name } [ rule rule ] slot
slotid
Command Format Which Applies IP Group and Link Group ACL at Same
time
packet-filter inbound ip-group { acl-number | acl-name } { rule rule link-group
{ acl-number | acl-name } [ rule rule [ system-index index ] ] | link-group {
acl-number | acl-name } rule rule }
undo packet-filter inbound ip-group { acl-number | acl-name } { rule rule
link-group { acl-number | acl-name } [ rule rule ] | link-group { acl-number |
acl-name } rule rule }
Command Format Which Only Applies Link Group ACL
packet-filter inbound link-group { acl-number | acl-name } [ rule rule [
system-index index ] ]
undo packet-filter inbound link-group { acl-number | acl-name } [ rule rule ]
View
Ethernet port view, port group view
Parameter
inbound: Performs filtering to the packets received by the interface.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and
advanced ACLs. acl-number : Sequence number of ACL, ranging from 2000 to