150 CHAPTER 11: ETHERNET LINK AGGREGATION CONFIGURATION COMMANDS
undo debugging lacp state [ interface interface-type interface-number [ to
interface-type interface-number ] ] { { actor-churn | mux | partner-churn | ptx |
rx }* | all }
View
User view
Parameter
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies a port or ports. The command without the parameter to specifies one
port, while the command with the parameter to specifies several contiguous
ports. interface-type indicates port type. interface-number indicates port number.
For more information, see the parameter description of the interface command.
actor-churn: Actor-churn state machine debugging switch.
mux: MUX state machine debugging switch.
partner-churn: Partner-churn state machine debugging switch.
ptx: PTX state machine debugging switch.
rx: RX state machine debugging switch.
all: debugging switch of all state machines.
Description
Use the debugging lacp state command to enable LACP state machine
debugging for the port.
Use the undo debugging lacp state command to disable LACP state machine
debugging for the port.
Example
# Enable debugging of all LACP state machines.
<SW8800> debugging lacp state all
debugging
link-aggregation error
Syntax
debugging link-aggregation error
undo debugging link-aggregation error
View
User view
Parameter
None
Description
Use the debugging link-aggregation error command to enable link
aggregation error debugging.
To Next Page
Loading...
