5
SUPER VLAN CONFIGURATION
COMMANDS
Super VLAN
Configuration
Commands
display supervlan Syntax
display supervlan [ supervlan-id ]
View
Any view
Parameter
supervlan-id: VLAN ID of a configured super VLAN. This argument ranges from 1
to 4094.
Description
Use the display supervlan command to display mapping relationship between a
specified super VLAN and sub VLANs, and the ports that identify the mapping
relationship.
Related command: supervlan, subvlan.
Example
# Display the mapping relationship between the super VLAN and the sub VLAN.
[SW8800] display supervlan 2
Supervlan ID : 2
Subvlan ID : 3-5
Subvlan in which arp proxy is disabled: None
# Display detailed information about the super VLAN and the sub VLANs displayed
above.
[SW8800]display vlan 2
VLAN ID: 2
VLAN Type: static
It is a Super VLAN.
Route Interface: configured
IP Address: 10.153.1.41
Subnet Mask: 255.255.255.0
Description: VLAN 0002
Tagged Ports: none
Untagged Ports: none
[SW8800]display vlan 3
VLAN ID: 3
To Next Page
Loading...
