QoS Commands 251
mirrored-to Syntax
Command Format Which Only Applies IP Group ACL
mirrored-to inbound ip-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { cpu | interface interface-type interface-number } cpu
undo mirrored-to inbound ip-group { acl-number | acl-name } [ rule rule ]
Command Format Which Applies IP Group and Link Group ACL at Same
time
mirrored-to inbound ip-group { acl-number | acl-name } { rule rule link-group {
acl-number | acl-name } [ rule rule [ system-index index ] ] | link-group {
acl-number | acl-name } rule rule } cpu { cpu | interface interface-type
interface-number }
undo mirrored-to inbound ip-group { acl-number | acl-name } { rule rule
link-group { acl-number | acl-name } [ rule rule ] | link-group { acl-number |
acl-name } rule rule }
Command Format Which Only Applies Link Group ACL
mirrored-to inbound link-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { cpu | interface interface-type interface-number }
undo mirrored-to inbound link-group { acl-number | acl-name } [ rule rule ]
View
Ethernet port view/port group view
Parameter
inbound: Mirrors inbound packets at the port.
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and
advanced ACLs. acl-number: Sequence number of ACL, ranging from 2000 to
3999. acl-name: Name of the ACL, which must be a character string starting with
an English letter (a-z or A-Z), and without any space in it.
link-group { acl-number | acl-name }: Activates Layer 2 ACLs. acl-number:
Sequence number of ACL, ranging from 4000 to 4999. acl-name: Name of ACL,
which must be a character string started with an English letter (a-z or A-Z), and
without any space in it.
rule rule: Specifies the rule of an active ACL, ranging from 0 to 127; if not
specified, all rules of ACL will be activated.
system-index index here is the system index for an ACL rule. When delivering a
rule, the system assigns a globally unique index to it, for convenience of later
retrieval. You can also assign a system index for it when delivering an ACL rule
with this command, but this value may change while the system is running.
Generally you are not recommended to manually assign a system index.
n
If the specified system-index is 0, the system selects the index automatically.
cpu: Mirrors traffic to the CPU.
To Next Page
Loading...
