3Com 8807 - Display Radius Nas-Ip; Display Radius Statistics

332 CHAPTER 21: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION COMMANDS
display radius nas-ip Syntax
display radius nas-ip
View
Any view
Parameter
None
Description
Use the display radius nas-ip command to display all the global NAS-IP
information configured in system view, including the global NAS-IP information of
public network and private network. When the NAS-IP information of global
private network is displayed, the name of the VPN that the NAS-IP belongs to is
also displayed.
Related command: radius nas-ip.
Example
# Display all NAS-IP information.
<SW8800> display radius nas-ip
Radius VPN nas-ip: 192.168.1.1 vpn-instance:vpn1
Radius VPN nas-ip: 192.168.2.1 vpn-instance:vpn2
Radius global nas-ip: 192.168.3.1
display radius statistics Syntax
display radius statistics
View
Any view
Parameter
None
Description
Use the display radius statistics command to view the statistics information of
RADIUS packet.
The displayed packet information can help with RADIUS diagnosis and
troubleshooting.
Related command: radius scheme.
Example
# Display the statistics information of RADIUS packets.
Packet unit The unit of packets
Table 42 Description of output information of the display radius command
Field Description