3Com 8807 - Display Msdp Brief; Display Msdp Peer-Status

638 CHAPTER 37: MSDP CONFIGURATION COMMANDS
View
User view
Parameter
all: All the debugging information of MSDP.
connect: Debugging information of MSDP peer connection reset.
event: Debugging information of MSDP event.
packet: Debugging information of MSDP packet.
source-active: Debugging information of active MSDP source.
Description
Use the debugging msdp command to enable MSDP debugging functions.
Use the undo debugging msdp command to disable MSDP debugging
functions.
By default, MSDP debugging functions are disabled.
Example
# Enable all common MSDP debugging functions.
<SW8800> debugging msdp all
display msdp brief Syntax
display msdp brief
View
Any view
Parameter
None
Description
Use the display msdp brief command to view the state of MSDP peer.
Example
# Display the state of MSDP peer.
<SW8800> display msdp brief
MSDP Peer Brief Information
Peer’s Address State Up/Down time AS SA Count Reset Count
20.20.20.20 Up 00:00:13 100 0 0
display msdp peer-status Syntax
display msdp peer-status [ peer-address ]
View
Any view