3Com 8807 - Display Ospf Asbr-Summary

OSPF Configuration Commands 423
display ospf
asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
ip-address: Matched IP address in dotted decimal format.
mask: IP address mask in dotted decimal format.
Description
Use the display ospf asbr-summary command to view the summary information
of OSPF imported route.
If the parameters are not set, the summary information of all OSPF imported
routes will be displayed.
Related command: asbr-summary.
Example
# Display the summary information of all OSPF imported routes.
<SW8800> display ospf asbr-summary
OSPF Process 1 with Router ID 1.1.1.1
Summary Addresses
Total summary address count: 2
Summary Address
net : 168.10.0.0
mask : 255.254.0.0
tag : 1
status : Advertise
The Count of Route is 0
Summary Address
net : 1.1.0.0
mask : 255.255.0.0
tag : 100
status : DoNotAdvertise
The Count of Route is 0
Nexthop Nexthop address
Interface The local output interface
Table 54 Description of the fields of the display ospf abr-asbr command
Field Description
Tab le 55 Description of the fields of the display ospf asbr-summary command
Field Description
net Destination network segment