3Com 8807 - Peer Ip-Prefix Export; Peer Ip-Prefix Import

672 CHAPTER 38: MBGP MULTICAST EXTENSION CONFIGURATION COMMANDS
[3Com-bgp] group TEST external.
[3Com-bgp] peer TEST as-number 2004
[3Com-bgp] peer 10.1.1.1 group TEST
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] peer TEST enable
[3Com-bgp-af-mul] peer 10.1.1.1 group TEST
peer ip-prefix export Syntax
peer group-name ip-prefix prefixname export
undo peer group-name ip-prefix prefixname export
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of peer group.
prefixname: Name of the specified ip-prefix.
Description
Use the peer ip-prefix export command to configure the route filtering policy of
routes advertised by the peer group based on the ip-prefix.
Use the undo peer ip-prefix export command to cancel the route filtering policy
of the peer/peer group based on the ip-prefix.
By default, the route filtering policy of the peer group is not specified.
The peer ip-prefix export command can only be configured on the peer groups.
Related command: ip ip-prefix, peer ip-prefix import.
Example
# Configure the route filtering policy of the peer group1 based on the ip-prefix
list1.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] peer group1 ip-prefix list1 export
peer ip-prefix import Syntax
peer { group-name | peer-address } ip-prefix prefixname import
undo peer { group-name | peer-address } ip-prefix prefixname import
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of peer group.