3Com 8807 - Flow-Template User-Defined

220 CHAPTER 16: ACL COMMANDS
Time-range : hhy ( Inactive )
from 08:30 2-5-2005 to 18:00 2-19-2005
Time-range : hhy1 ( Inactive )
from 08:30 2-5-2003 to 18:00 2-19-2003
# Display time range tm1.
<SW8800> display time-range tm1
Current time is 14:37:31 4-3-2003 Thursday
Time-range : tm1 ( Inactive )
from 08:30 2-5-2005 to 18:00 2-19-2005
flow-template
user-defined
Syntax
flow-template user-defined
undo flow-template user-defined
View
Ethernet port view/port group view
Parameter
None.
Description
Use the flow-template user-defined command to apply the user-defined flow
template to the current port or port group.
Use the undo flow-template user-defined command to cancel the applied flow
template on the current port or port group.
Tabl e 29 Description of displayed information
Field Description
Current time is
14:36:36 4-3-2003
Thursday
The current time of the system
Time-range : hhy
( Inactive )
from 08:30 2-5-2005
to 18:00 2-19-2005
Time range testhhy. "Inactive" means that the time range is inactive
currently ("active" means the time range is active), and the time
range is from 08:30 2-5-2005 to 18:00 2-19-2005
The displayed information below is similar.
Tabl e 30 Description of displayed information
Filed Description
Current time is
14:36:36 4-3-2003
Thursday
The current time of the system.
Time-range : tm1
( Inactive )
from 08:30 2-5-2005
to 18:00 2-19-2005
Time range tml. "Inactive" means that the time range is inactive
currently (active means the time range is active), and the time range
is from 08:30 2-5-2005 to 18:00 2-19-2005
The displayed information below is similar.