3Com 8807 - Router Route-Limit; Router VRF-Limit

Route Capacity Configuration Commands 565
29
ROUTE CAPACITY CONFIGURATION
COMMANDS
Route Capacity
Configuration
Commands
router route-limit Syntax
router route-limit { 128K | 256K | 512K }
View
System view
Parameter
128K: Sets the maximum number of route entries supported by current system to
128 K.
256K: Sets the maximum number of route entries supported by current system to
256 K.
512K: Sets the maximum number of route entries supported by current system to
512 K.
Description
Use the router route-limit command to set the maximum number of route
entries supported by the current system. If the maximum number of route entries
supported by a card is less than this number, the system will inhibit the card from
working.
By default, the maximum number of route entries is 128 K.
Example
# Set the maximum number of route entries supported by the current system to
256 K.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] router route-limit 256K
router VRF-limit Syntax
router VRF-limit { 256 | 512 | 1024 }