3Com 8807 - Debugging Ntp-Service

55
NTP CONFIGURATION COMMANDS
NTP Configuration
Commands
debugging ntp-service Syntax
debugging ntp-service { access | adjustment | authentication | event | filter |
packet | parameter | refclock | selection | synchronization | validity | all }
undo debugging ntp-service { access | adjustment | authentication | event |
filter | packet | parameter | refclock | selection | synchronization | validity |
all }
View
User view
Parameter
access: Enables NTP access control debugging.
adjustment: Enables NTP clock adjustment debugging.
all: Enables all NTP debugging functions.
authentication: Enables NTP authentication debugging.
event: Enables NTP event debugging.
filter: Enables NTP filter information debugging.
packet: Enables NTP packet debugging.
parameter: Enables NTP clock parameter debugging.
refclock: Enables NTP reference clock debugging.
selection: Enables NTP clock selection information debugging.
synchronization: Enables NTP clock synchronization information debugging.
validity: Enables NTP remote host validity debugging.
Description
Use the debugging ntp-service command to debug different NTP services.