3Com 8807 - Igmp-Snooping Group-Policy

IGMP Snooping Configuration Commands 575
# Enable IGMP Snooping fast leave on the Ethernet2/1/1 port in all VLANs. Then
disable the feature in VLAN 3.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet2/1/1
[3Com-Ethernet2/1/1] igmp-snooping fast-leave
[3Com-Ethernet2/1/1] undo igmp-snooping fast-leave vlan 3
# Disable IGMP Snooping fast leave on the Ethernet2/1/1 port in all VLANs.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface Ethernet2/1/1
[3Com-Ethernet2/1/1] undo igmp-snooping fast-leave
# Enable IGMP Snooping fast leave on all Ethernet ports in VLAN 5.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] igmp-snooping fast-leave vlan 5
# Enable IGMP Snooping fast leave on all Ethernet ports in all VLANs.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] igmp-snooping fast-leave
# Enable IGMP Snooping fast leave for all Ethernet ports except those in VLAN 5.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] igmp-snooping fast-leave
[SW8800] undo igmp-snooping fast-leave vlan 5
# Disable IGMP Snooping fast leave in all VLANs.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] undo igmp-snooping fast-leave
igmp-snooping
group-policy
Syntax
igmp-snooping group-policy acl-number
undo igmp-snooping group-policy
View
VLAN view
Parameter
acl-number: Number of basic ACL, in the range of 2,000 to 2,999.
Description
Use the igmp-snooping group-policy command to configure the filtering rule of
multicast groups on a specified VLAN so as to control the access to IP multicast