3Com 8807 - Scheme

322 CHAPTER 21: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION COMMANDS
Parameter
simple: Specifies to display passwords in simple text.
cipher: Specifies to display passwords in cipher text.
password: Defines a password, which is a character string of up to 16 characters if
it is in simple text and of up to 24 characters if it is in cipher text.
Description
Use the password command to configure a password display mode for local
users.
Use the undo password command to cancel the specified password display
mode.
If local-user password-display-mode cipher-force has been adopted, the user
efforts of using the password command to set the password display mode to
simple text (simple) will render useless.
Related command: display local-user.
Example
# Set the user 3com1 to display the password in simple text, given the password is
20030422.
[3Com-luser-3com1] password simple 20030422
scheme Syntax
scheme { radius-scheme radius-scheme-name [ local ] | hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local | none }
undo scheme { radius-scheme | hwtacacs-scheme | none }
View
ISP domain view
Parameter
radius-scheme-name: RADIUS scheme name, a string no longer than 32 characters
in length.
hwtacacs-scheme-name: HWTACACS scheme name, a string no longer than 32
characters in length.
local: Specifies to perform local authentications.
none: Specifies not to perform authentications.
Description
Use the scheme command to configure the AAA scheme used in the current ISP
domain.
Use the undo scheme command to restore the default domain AAA scheme.