1096 CHAPTER 67: PASSWORD CONTROL CONFIGURATION COMMANDS
<SW8800> reset password-control history-record user-name test
Are you sure to delete all the history record of user test ?[Y/N]
If you type "Y", the system will delete all the history password records of the
specified user and gives the following prompt:
Updating the password file, please wait...
All historical passwords of this user have been cleared.
reset password-control
history-record super
Syntax
reset password-control history-record super [ level level-value ]
View
User view
Parameter
level-value: Specifies to delete the history records of super passwords of users at a
certain level. The value range is 1 to 3.
Description
Use the reset password-control history-record super level level-value
command to delete the history records of the super passwords for the users at the
specified level.
Use the reset password-control history-record super command to delete the
history records of all super passwords.
After the history password record of a user is deleted, the configuration of a new
password will not be restricted by the previously configured history password
records.
Example
# Delete the history records of super passwords for the users at level 2.
<SW8800>reset password-control history-record super level 2
Are you sure to clear the specified-level super password history records?[Y/N]
If you type "Y", the system will delete the history records of super passwords for
users at level 2.
reset password-control
blacklist
Syntax
reset password-control blacklist [ username username ]
View
User view
Parameter
username username: Specified a user name.
Description
Use the reset password-control blacklist command to remove all the users from
the blacklist.
To Next Page
Loading...
