3Com 8807 - Display Ssh Server; Display Ssh User-Information

946 CHAPTER 56: SSH TERMINAL SERVICE CONFIGURATION COMMANDS
=====================================
Key Code:
308188
028180
CFC6A68B 39F742A2 76E55B07 39D60B73 D7B4040D 515B2516 17CE9380
53829FF5
C0489BD9 559CC425 CAF37E6F E6417337 693DF5CD 02F12469 420BBD5C
38741295
D74B2336 A5F28FE8 00E0429F FCF47A7F AEF0A1B9 740FC2BE 99F26F35
39C8867D
FAE8C2A1 EAC4CB42 A64982C9 4BA1DD63 49619762 E46F17DF ED1C1ACC
DFAB8CB5
0203
010001
display ssh server Syntax
display ssh server { status | session }
View
Any view
Parameter
status: Displays the SSH status information.
session: Displays the SSH session information.
Description
Use the display ssh server command to display the status information or session
information of an SSH server.
Related command: ssh server authentication-retries, ssh server
rekey-interval, ssh server timeout.
Example
# Display the status information of the SSH server.
<SW8800> display ssh server status
SSH - version 2.0
SSH connection timeout: 60 seconds
SSH Authentication retries: 3 times
SFTP Server: Disable
# Display the session information of the SSH server.
[SW8800] display ssh server session
Connection Version Encryption State Username
VTY0 2.0 3DES Session started 3Com
VTY3 1.5 DES Session started switch
display ssh
user-information
Syntax
display ssh user-information [ username ]