3Com 8807 - Display Route-Policy; Display Ip Ip-Prefix

IP Routing Policy Configuration Commands 553
display ip ip-prefix Syntax
display ip ip-prefix [ ip-prefix-name ]
View
Any view
Parameter
ip-prefix-name: Specifies displayed address prefix list name.
Description
Use the display ip ip-prefix command to view the address prefix list.
If no ip-prefix-name is specified, all configured address prefix lists are displayed.
Related command: ip ip-prefix.
Example
# Display the information of the address prefix list named as p1.
<SW8800> display ip ip-prefix p1
name index conditions ip-prefix / mask GE LE
p1 10 permit 10.1.0.0/16 17 18
display route-policy Syntax
display route-policy [ route-policy-name ]
View
Any view
Parameter
route-policy-name: Specifies displayed Route-policy name.
Description
Use the display route-policy command to view the configured Route-policy.
If the route-policy-name argument is not specified, all configured Route-policies
are displayed.
Related command: route-policy.
Tab le 78 Description of the fields of the display ip ip-prefix command
Field Description
name Name of ip-prefix
index Internal sequence number of ip-prefix
conditions Mode: permit or deny
ip-prefix / mask Address and network segment length of ip-prefix
GE Greater-equal value of ip-prefix network segment length
LE Less-equal value of ip-prefix network segment length