3Com 8807 - Display Bgp Routing-Table Dampened

514 CHAPTER 27: BGP CONFIGURATION COMMANDS
1.1.3.0/24 256 10.10.10.1 0 IGP 200
2.2.3.0/24 256 10.10.10.1 0 INC 200
4.4.4.0/24 256 10.10.10.1 0 INC 200
9.9.9.0/24 256 10.10.10.1 0 INC 200
10.10.10.0/24 0 10.10.10.2 0 IGP
10.10.10.0/24 256 10.10.10.1 0 IGP 200
For detailed description of the output information, see Table 74.
display bgp
routing-table dampened
Syntax
display bgp routing-table dampened
View
Any view
Parameter
None
Description
Use the display bgp routing-table dampened command to view BGP
dampened routes.
Example
# View BGP dampened information.
<SW8800> display bgp routing-table dampened
Flags: # - valid, ^ - best,
D - damped, H - history,
I - internal, S - aggregate suppressed
B - balance
Dest/Mask Source Damping-limit Origin As-path
-----------------------------------------------------------------
#D 11.1.0.0/16 133.1.1.2 1:20:00 IGP 200
Tabl e 76 Description of the fields of the display bgp routing-table dampened command
Field Description
Flags
State flags:
# - valid (valid)
^ - best (selected)
D - damped (discarded)
H - history (history)
I - internal (interior gateway protocol)
S - aggregate suppressed (suppressed)
#D The valid and damped route
Dest/Mask The dampened route to the destination network 11.1.0.0
Source The nexthop of the route
Damping-limit The time before dampening turns invalid and the route can be reused.