3Com 8807 - Password; Display Password-Control Super

1090 CHAPTER 67: PASSWORD CONTROL CONFIGURATION COMMANDS
View
Any view
Parameter
username:user name added into the blacklist.
ipaddress:user IP address added into the blacklist.
Description
Use the display password-control blacklist command to view the user
information added into the backlist based on the user name or IP address after
failed attempts of entering passwords.
Example
# Display the information of all users added into the blacklist after failed attempts
of entering passwords.
<SW8800> display password-control blacklist
USERNAME IP
Jack 10.1.1.2
The number of users in blacklist is :1
display
password-control super
Syntax
display password-control super
View
Any view
Parameter
None
Description
Use the display password-control super command to view the password
control information for super passwords, including password aging time and the
minimum password length.
Example
# Display the super password control information.
<SW8800> display password-control super
Super’s password settings:
Password Aging : Enabled(10 days)
Password Length: Enabled(10 Characters)
password Syntax
password [ simple | cipher ] password
undo password
View
Local user view