Multicast Common Configuration Commands 591
ip managed-multicast Syntax
ip managed-multicast
undo ip managed-multicast
View
System view
Parameter
None
Description
Use the ip managed-multicast command to enable the managed multicast
function of the system.
Use the undo ip managed-multicast to disable the managed multicast function.
Related command: display local-user, service-type lan-access.
Example
# Enable the managed multicast function of the system.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]ip managed-multicast
local-user multicast Syntax
local-user multicast [ domain domain-name ] ip-address [ mask-length ]
undo local-user [ domain domain-name ] ip-address
View
System view
Parameter
ip-address: IP address of the multicast group.
mask-length: Mask length of the multicast group.
domain domain-name: Domain name of the multicast group.
Description
Use the local-user multicast command to specify the multicast group(s) that
users in a specified domain can join.
Use the undo local-user multicast command to cancel the configuration.
Matched 3 entries 3 entries in total meeting the requirement
Table 83 Description on the fields of the display multicast routing-table command
Field Description
To Next Page
Loading...
