3Com 8807 - Ssh Service-Type Default; Sftp Server Enable

960 CHAPTER 56: SSH TERMINAL SERVICE CONFIGURATION COMMANDS
The command is as follows:
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] ssh2 10.214.50.51 prefer_kex dh_exchange_group prefer_ctos_
cipher 3des prefer_ctos_hmac md5
SFTP Server
Configuration
Commands
sftp server enable Syntax
sftp server enable
undo sftp server
View
System view
Parameter
None
Description
Use the sftp server enable command to start the SFTP server.
Use the undo sftp server enable command to shutdown the SFTP server.
By default, the SFTP server is shutdown.
Example
# Start the SFTP server.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] sftp server enable
# Shutdown the SFTP server.
[SW8800] undo sftp server
ssh service-type default Syntax
ssh service-type default { all [sftp-directory directory ] | sftp [ sftp-directory
directory ] | stelnet }
undo ssh service-type default
View
System view
Parameter
all: Specifies that the default service type can be either Stelnet or SFTP.