3Com 8807 - Display Current-Configuration

3
CONFIGURATION FILE MANAGEMENT
COMMANDS
Configuration File
Management
Commands
display
current-configuration
Syntax
display current-configuration [ controller | interface interface-type
interface-number | configuration [ configuration ] ] [ | { begin | exclude | include
} regular-expression ]
View
Any view
Parameter
controller: Views the configuration information of controllers.
interface: Views the configuration information of interfaces.
interface-type: Type of the interface, including Aux, Ethernet, GigabitEthernet,
NULL, Vlan-interface, M-Ethernet, LoopBack.
interface-number: Number of the interface.
configuration configuration: Views the pre-positive and post-positive
configuration information. The value of configuration is the key word of the
configuration, such as:
■ system: Views the host name.
■ timerange: Views the configuration information of time range.
|: Filters the configuration information to be output by regular expression.
begin: Begins with the line that matches the regular expression.
exclude: Excludes lines that match the regular expression.
include: Includes lines that match the regular expression.
regular-expression: Defines the regular expression.