3Com 8807 - Display Mpls Ldp Session

696 CHAPTER 39: MPLS BASIC CONFIGURATION COMMANDS
By default, you can view all the Remote-peer configurations.
Related command: mpls ldp remote-peer and remote-ip.
Example
# Display the Remote-peer configuration.
<SW8800> display mpls ldp remote
Displaying information about all Ldp Remote Peers:
Remote Index: 1
Peer Address: 1.1.1.1 Transport Address: 2.2.2.2
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:45
Hello packets sent/rcv:6515/6509
Remote Index: 3
Peer Address: 3.3.3.3 Transport Address: 2.2.2.2
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:45
Hello packets sent/rcv:6457/6453
Remote Index: 4
Peer Address: 1.1.0.3 Transport Address: 2.2.2.2
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:0
Hello packets sent/rcv:0/0
Remote Index: 7
Peer Address: 1.1.1.7 Transport Address: 2.2.2.2
Configured KeepAlive hold time:60, Configured Hello hold time:45
Negotiated Hello hold time:0
Hello packets sent/rcv:0/0
display mpls ldp session Syntax
display mpls ldp session [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular
expression.
include: Displays only those outputs matching the regular expression.
text: Contents of the regular expression.
Description
Use the display mpls ldp session command to know the session between peer
entities.