3Com 8807 - Clock Datetime; Clock Summer-Time

61
SYSTEM MAINTENANCE COMMANDS
Basic System
Configuration and
Management
Commands
clock datetime Syntax
clock datetime HH:MM:SS YYYY/MM/DD
View
User view
Parameter
HH:MM:SS: Current time. HH ranges from 0 to 23. MM and SS range from 0 to
59.
YYYY/MM/DD: Year, month and date. YYYY ranges from 2000 to 2100. MM
ranges from 1 to 12 and DD ranges from 1 to 31.
Description
Use the clock datetime command to configure the current date and clock of the
switch.
By default, the date and clock of the switch is set to 0:0:0, 2000/1/1.
The current date and clock of the switch must be set by this command where
absolute time is strictly required.
Related command: display clock.
Example
# Set the current date of the switch to 0:0:0, 2001/01/01.
<SW8800> clock datetime 0:0:0 2001/01/01
clock summer-time Syntax
clock summer-time zone-name { one-off | repeating } start-time start-date
end-time end-date offset-time
undo clock summer-time
View
User view