EasyManua.ls Logo

3Com 8807 - Portal Server

3Com 8807
1099 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
378 CHAPTER 22: PORTAL CONFIGURATION COMMANDS
portal server Syntax
portal server server-name { ip ip-address | key key-string | port port | url
url-string } *
undo portal server server-name [ key | port | url ]
View
System view
Parameter
server-name: Name of a Portal server. It is a string in the range of 1 to 32
characters.
ip-address: IP address of a Portal server. This address cannot be full-zero addresses,
loopback addresses, multicast addresses or broadcast addresses.
key-string: Shared keys that the Portal server needs when it communicates with
the switch. It is a string in the range of 1 to 16 characters. It is "3com" by default.
port: Port that a switch uses to send packets to a Portal server. It is in the range of
1 to 65534. It is 50100 by default.
url-string: URL that HTTP redirects to, which is the string form of the ip-address by
default. For example, if the ip-address is 10.1100.100.100, the default URL is
http://10.11.100.100. The string need not be bracketed when entered.
Description
Use the portal server command to create a Portal server or modify the
configuration of a Portal server.
Use the undo portal server command to delete the specified server, or restore
the default parameter configuration of the specified server.
c
CAUTION:
When configuring a Portal server, you must also configure the IP address for
that server.
If the Portal server has been configured on a VLAN virtual interface, you must
disable this Portal server on the virtual VLAN interface before modifying its
parameters. Enable the Portal server again after parameters are modified.
A Portal server will use a free IP address automatically. If the number of free IP
addresses has reached the maximum when a Portal server is configured, this
configuration will fail.
Example
# Set the IP address of the Portal server named 3Com to 10.10.100.100,
communication key to lanswitch, port to 50101, and the URL that HTTP redirects
to http://www.3com.com.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] portal server 3Com ip 10.10.100.100 key lanswitch port 5010
1
url http://www.3com.com

Table of Contents

Other manuals for 3Com 8807

Related product manuals