3Com 8807 - Password-Control

Password Control Configuration Commands 1091
Parameter
simple: Plain text, a string containing 1 to 63 characters.
cipher: Cipher text, a string containing 1 to 88 characters.
password: Login password.
Description
Use the password command to configure the password for a local user.
Use the undo password command to delete the user password.
By default, no password is set for local users.
To access the FTP server through FTP, you must perform this configuration.
For related configuration, refer to password-control.
Example
# Set the system login password to 9876543210.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800]local-user test
[3Com-luser-test]password
Password:**********
confirm:**********
Updating the password file, please wait...
# change the system login password to 0123456789.
[3Com-luser-test]password
Password:**********
Confirm :**********
Updating password-file ,please waiting ...
password-control Syntax
password-control { aging aging-time | length length | login-attempt
login-times [ exceed { lock | unlock | locktime
[ time ] } ]
| history max-record-num | alert-before-expire alert-time |
authentication-timeout authentication-timeout }
undo password-control { aging | length | login-attempt | history |
alert-before-expire | authentication-timeout | exceed { lock | unlock |
locktime } }
View
System view