3Com 8807 - Display Tcp Statistics

112 CHAPTER 8: IP PERFORMANCE CONFIGURATION COMMANDS
display tcp statistics Syntax
display tcp statistics
View
Any view
Parameter
None
Description
Use the display tcp statistics command to view the statistics information about
TCP packets.
For the related commands, see display tcp status, reset tcp statistics.
Tabl e 15 Description on the fields of the display ip statistics command
Field Description
Input:
sum Sum of input packets
local Number of received packets
whose destination is the local
device
bad protocol Number of packets with
wrong protocol number
bad format Number of packets in bad
format
bad checksum Number of packets with
wrong checksum
bad options Number of packets that have
wrong options
Output:
forwarding Number of forwarded packets
local Number of packets that are
sent by the local device
dropped Number of dropped packets
during transmission
no route Number of packets that
cannot be routed
compress fails Number of packets that
cannot be compressed
Fragment:
input Number of input fragments
output Number of output fragments
dropped Number of dropped
fragments
fragmented Number of packets that are
fragmented
couldn’t fragment Number of packets that
cannot be fragmented
Reassembling:
sum Number of packets that are
reassembled
timeouts Number of packets that time
out