3Com 8807 - Display Environment; Display Fan

984 CHAPTER 58: DEVICE MANAGEMENT COMMANDS
Example
# Show device information.
<SW8800> display device
Slot No. Brd Type Brd Status Subslot Num Sft Ver
0 3C17539 Master 0 8500-0004
1 NONE Absent Absent None
2 NONE Absent Absent None
3 NONE Absent Absent None
4 NONE Absent Absent None
5 NONE Absent Absent None
6 NONE Absent Absent None
7 NONE Absent Absent None
display environment Syntax
display environment
View
Any view
Parameter
None
Description
Use the display environment command to view environment information.
Example
# Display the environment information.
<SW8800> display environment
System temperature information (degree centigrade):
----------------------------------------------------
Slot Temperature Lower limit Upper limit
0 33 10 45
2 35 10 65
4 34 10 65
display fan Syntax
display fan [ fan-id ]
View
Any view
Parameter
fan-id: the fan ID.
Description
Use the display fan command to view the working state of the built-in fans. User
can perform this command to see if they work normally.
Example
# Display the working state of the fans.