3Com 8807 - Multicast Static-Router-Port; Reset Igmp-Snooping Statistics

Multicast Static Routing Port Configuration Commands 579
Example
# Set the aging time of the IGMP Snooping router port to 500 seconds.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] igmp-snooping router-aging-time 500
reset igmp-snooping
statistics
Syntax
reset igmp-snooping statistics
View
User view
Parameter
None
Description
Use the reset igmp-snooping statistics command to reset the IGMP Snooping
statistic information.
Related command: igmp-snooping.
Example
# Clear IGMP Snooping statistic information.
<SW8800> reset igmp-snooping statistics
Multicast Static
Routing Port
Configuration
Commands
multicast
static-router-port
Syntax
In VLAN view:
multicast static-router-port port-number
undo multicast static-router-port port-number
In Ethernet port view:
multicast static-router-port vlan vlan-id
undo multicast static-router-port vlan vlan-id
View
VLAN view, Ethernet port view