3Com 8807 - Display Snmp-Agent Statistics

902 CHAPTER 53: SNMP CONFIGURATION COMMANDS
c
CAUTION: If the SNMP Agent is disabled, "Snmp Agent disabled" will be
displayed after you execute the above display commands.
display snmp-agent
statistics
Syntax
display snmp-agent statistics
View
Any view
Parameter
None
Description
Use the display snmp-agent statistics command to view current state of SNMP
communication.
This command provides a counter for SNMP operations.
Example
# Display the current state of SNMP communication.
<SW8800> display snmp-agent statistics
0 Messages delivered to the SNMP entity
0 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known
0 Messages which represented an illegal operation for the community supplied
0 ASN.1 or BER errors in the process of decoding
9 Messages passed from the SNMP entity
0 SNMP PDUs which had badValue error-status
0 SNMP PDUs which had genErr error-status
0 SNMP PDUs which had noSuchName error-status
0 SNMP PDUs which had tooBig error-status (Maximum packet size 2000)
9 MIB objects retrieved successfully
0 MIB objects altered successfully
0 GetRequest-PDU accepted and processed
9 GetNextRequest-PDU accepted and processed
0 GetBulkRequest-PDU accepted and processed
9 GetResponse-PDU accepted and processed
0 SetRequest-PDU accepted and processed
0 Trap PDUs accepted and processed
0 Alternate Response Class PDUs droped silently
0 Forwarded Confirmed Class PDUs droped silently
The following table describes the output fields.
Tabl e 126 Description on the fields of the display snmp-agent mib-view command
Field Description
View name View name
MIB Subtree MIB subtree
Subtree
mask
Subtree mask
storage-type Storage type
View Type Permit or forbid access to an MIB object
View status Indicate the line state in the table