3Com 8807 - Debugging Mpls Lspm

39
MPLS BASIC CONFIGURATION
COMMANDS
MPLS Basic
Configuration
Commands
debugging mpls lspm Syntax
debugging mpls lspm { agent | all | event | ftn | interface | packet | policy |
process | vpn }
undo debugging mpls lspm { agent | all | event | ftn | interface | packet |
policy | process | vpn }
View
User view
Parameter
agent: Enables all MPLS Agent debugging.
all: Enables all MPLS-related debugging.
event: Enables debugging for various MPLS events.
ftn: Enables MPLS FTN debugging.
interface: Enables the MPLS debugging on the message sending/receiving
interface.
packet: Enables MPLS packet debugging.
policy: Enables MPLS policy debugging.
process: Enables debugging of MPLS internal processing.
vpn: Enables all MPLS VPN debugging.
Description
Use the debugging mpls lspm command to enable various LSPM debugging.
Use the undo debugging mpls lspm command to disable the corresponding
debugging.
By default, all debugging is disabled.