3Com 8807 - Debugging Portal; Display Portal

22
PORTAL CONFIGURATION COMMANDS
Portal Configuration
Commands
debugging portal Syntax
debugging portal { acm | all | arp-handshake | server | tcp-cheat }
undo debugging portal { acm | all | arp-handshake | server | tcp-cheat }
View
User view
Parameter
acm: Enables the debugging for authentication connection management (ACM),
that is to say, enables the debugging for state machines related with
authentication, connection and management.
all: Enables all the debugging for Portal.
arp-handshake: Enables the debugging for ARP-handshake.
server: Enables the debugging for Portal server.
tcp-cheat: Enables the debugging for TCP cheat.
Description
Use the debugging portal command to enable the debugging for Portal.
Use the undo debugging portal command to disable the debugging output.
Example
# Enable all the debugging for Portal.
<SW8800> debugging portal all
display portal Syntax
1. display portal { acm | server | tcp-cheat } statistics
2. display portal [ auth-network [ auth-vlan-id ] | free-ip | free-user | server [
server-name ] | vlan [ vlan-id ] ]
3. display portal user [ ip ipaddress | interface interface-type interface-number |
vlan vlan-id ]