3Com 8807 - Display Ospf Vlink

436 CHAPTER 25: OSPF CONFIGURATION COMMANDS
View
Any View
Parameter
process-id: ID of an OSPF process. If the process ID is not specified, the major
information about all the OSPF processes will be displayed in the order in which
IDs are configured.
Description
Use the display ospf graceful-restart status command to display the
information about OSPF Graceful Restart. .
Example
# Display the information about OSPF Graceful Restart.
<SW8800> display ospf graceful-restart status
OSPF Process 1 with Router ID 30.1.1.1
Restart Status
Restart Mode : Compatible
Restart Status : Help Restart
Help NBR Number : 1
NBR ID : 91.1.1.1
OOB NBR Number : 1
NBR ID : 91.1.1.1
OSPF Process 2 with Router ID 10.1.1.1
Restart Status
Restart Mode : Standard
Restart Interval : 120
Restart Status : Help Restart
Help NBR Number : 1
NBR ID : 10.1.1.2
# Display the information about Graceful Restart of OSPF 1.
<SW8800> display ospf 1 graceful-restart status
OSPF Process 1 with Router ID 30.1.1.1
Restart Status
Restart Mode : Compatible
Restart Status : Help Restart
Help NBR Number : 1
NBR ID : 91.1.1.1
OOB NBR Number : 1
NBR ID : 91.1.1.1
display ospf vlink Syntax
display ospf [ process-id ] vlink
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.