3Com 8807 - Boot Bootrom; Display Boot-Loader

982 CHAPTER 58: DEVICE MANAGEMENT COMMANDS
<SW8800> boot boot-loader primary slot1#flash:/s8500-vrp310-r1262.app slot 1
The specified file will be booted next time!.
boot bootrom Syntax
boot bootrom file-url slot slot-num-list
View
User view
Parameter
file-url: Path and name of Bootrom file in the storage device.
slot slot-num-list: Specifies the slot number list of switch. The formula is
slot-num-list={ slot-num [ to slot-num ] }&<1-n>. &<1-n> indicates that the prior
parameter can be input for n times. For Switch 8807, n is 7; for Switch 8814, n is
14.
Description
Use the boot bootrom command to upgrade Bootrom.
Example
# Upgrade bootrom of No.1slot.
<SW8800> boot bootrom PLATV100R002B09D002.app slot 1
display boot-loader Syntax
display boot-loader
View
Any view
Parameter
None
Description
Use the display boot-loader command to view APP file used this time and next
time.
Example
<SW8800> display boot-loader
The primary app to boot of slot 0 at the next time is: flash:/switch.app
The backup app to boot of slot 0 at the next time is: flash:/switch.app
The app to boot of slot 0 at this time is: flash:/switch.app
Tabl e 137 Description on the fields of the display boot-loader command
Field Description
The app to boot of slot 0 at the next time is:
flash:/Switch.app
Startup file used on startup next time
The app to boot of slot 0 at this time is:
flash:/PLAT.APP
Startup file used on startup this time