3Com 8807 - Refresh Bgp Multicast; Reflect Between-Clients

MBGP Multicast Extension Configuration Commands 677
Use the undo preference command to restore the default priority.
You can configure different priority values for different types of MBGP routes.
Example
# Set the priority of EBGP, IBGP and local routes all to 170.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] preference 170 170 170
reflect between-clients Syntax
reflect between-clients
undo reflect between-clients
View
IPv4 multicast sub-address family view
Parameter
None
Description
Use the reflect between-clients command to enable route reflection between
clients.
Use the undo reflect between-clients command to disable route reflection
between clients.
When configured, the route reflector can reflect routes of a client to other clients.
By default, all-connection is not required for the clients with route reflectors
configured, since the routes are by default reflected from one client to others. For
all-connection clients, route reflection is unnecessary.
Related command: reflector cluster-id and peer reflect-client.
Example
# Disable route reflection function.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] undo reflect between-clients
refresh bgp multicast Syntax
refresh bgp { all | peer-address | group group-name } multicast { import |
export }